With cash being tight nowadays, perhaps the solution to giving your car a brand new look will be to indulge in several car spray painting. If the mechanics of it are in good shape, but the body is not so hot, then painting it may be the perfect answer.

Its a fantastic money-saver, but even more so if you do it yourself as opposed to getting it professionally done up. You could do it if you read the fundamentals and follow the instructions for car spray painting. It’s fundamental though if you decide youre going to take on this project that you are ready to see it complete till the end.

First of all, you require various supplies. These comprise of:

-coverings to protect the unpainted areas and masking tape to hold these in place -a good car-wash soap and brush as well as a wax/grease remover. -several grits of sand-paper -primers and paint thats urethane base for the car spray painting -paint sprayer -safety equipment like masks, goggles and protective clothing -knife and putty for fill ins.

One : You must be sure that you wash the car thoroughly to get rid of every grime and debris. If you don’t then these things would be set in with your paint, leaving a very daunting look to the finished job. Follow up with a wax/grease remover so the paint you utilize for the car spray painting would adhere the right way.

Two : Get rid of any rough spots by sanding. Once this has been done be certain to rinse off whatever of the loose sandings. This is where you’ll want to utilise the putty to fill in any minor pit marks, that’re have been caused from stones for instance.

3 : Don’t get in too much of a rush to begin your car spray painting. The car must be completely dry so its best to leave it to do so for some hours. You can go ahead and cover whatsoever of the areas that your dont want to get paint on.

4 : Presently youre ready to begin with the primer. Dont skip this step, as it’ll give a much better look to the finished project. It helps the paint to adhere the right way and provides for a more even finish. Next, once the primer is dry you would need to lightly sand it down.

Five : Youre finally at the step you have been waiting for. It’s time to apply the color for your car spray painting. Whether you have chosen to use aerosol paints or a spray gun, the premise remains the same. Just apply thin coats. Several would likely be needed. Many light coats are much better than 1 thick coat. You’ll be able to tell just by looking at the car how many more coats of paint it will require. A few will only need 2 where as some others might need 3 or four.

Six : Finally, down to the last step and thats applying the clear coat. This is done precisely the same as the colored coats.

Now you can clean up, step back and look up to the masterpiece you have produced.

Technorati Tags: Art And Entertainment, auto, auto bodywork, automotive, car painting, car repair, cars, hobbies, recreation, self-help, spray paint