You’ll be dumbfounded to see merely how to spray car paint truly can be simple. That does not signify that you can just seize a tin of paint and go at it. There’re various basics you require to acknowledge. Both in the preparation and application.

Step A: Start by gathering everything that you are going to utilise. Be sure your surrounding area is protected against any possible over spray. Whatsoever parts that dont need to be sprayed and that could be removed then do so. For some other areas cover well with paper and masking tape.

Step B: You’ll have to study the car cautiously for whatever rough spots. These will need to be sanded with 300 grit sand paper. This’ll smooth out the rough spots. It also permits the spray car paint to adhere better. Once you’ve finished sanding, be sure all of the dust dirt and debris are removed from the car. It’s imperative that the car be perfectly clean.

Step C: You’ll need to apply a primer. This’ll make sure that you get an overall even coat of your coloured paint plus helps the paint to adhere well. When you spray the primer, make sure you apply light coats and allow for drying in ‘tween. How to spray car paint takes a little getting used to.

Step D: Now youre pretty well to the point where you’re about ready to spray the color. You will have decided to utilize the spray car paint that comes in aerosol cans, or maybe you have chosen the spray gun. In either case, make a few practice strokes on an object before you begin with the car. Once you are ready, start the passes with the paint with out hesitation. If you hold the spray can or gun in one spot, you would end up with uneven coverage and possibly the paint would run. If this happens you’ve a huge repair job on your hand. You will most likely have instructions as to how to spray car paint utilizing the equipment or spray cans.

Step E: It is up to you whether you want to wet sand ‘tween coats of primer and color paints. You might want to research this selection on the web, or check with somebody that is familiar with how to spray car paint

Step F: Once youre entirely contented with the colour, you are down to the finishing touches. You will now want to apply several clear coats. This’ll give the gloss and completeed look to the car as well as protect the finish. Likely 2 coats will be enough but it’ll be up to you. Make very sure it is dry in ‘tween coats.

Step G: Over again, you’ve the choice of wet sanding if you choose. Once again, I advise you ask the advice of people that’re familiar with how to spray paint a car. If you decide to follow this step then you need to wet sand with the following grits in this order. Utilise eight hundred, one thousand, 1200, one thousand five hundred and eventually the two thousand. This will take out spots that would be excessively heavy in the clear coat application.

Step H: Now you will want to utilizing a rubbing compound to buff the surface so you could use a 2000 grit to get rid of whatsoever scratches.

Step I: You should now buff the surface. To do this simply use a reasonable cut polish. Once you have done this, you should have a perfect glassy look to the finish.

Step J: Lastly, you may want to apply a few coats of wax.